The Stay-At-Home order came down. Except for essential errands, we are to stay home and away from other places and other people to help stop the spread of the virus. While you would think this would give me lots of time to get things done around the house and yard and work on my kite projects. Instead, the lack of any type of deadline only increases my tendency to put things off. And so, this weeks post is late. Sorry.
I have started the Giant Hata kite. The main sail is black and is 60″ by 60″. That was a challenge on my narrow table. It was only made harder because my supposedly 60″ roll of fabric was really 61.5″. So instead of making just one long cut, I had to trim one side as well.
The pattern for this kite is a variation of the sun theme I used on my Maryland Kite Society build. Only this is going to be a sun/moon. The pattern was traced onto the yellow fabric and the white moon fabric laid over it. Then it was sew the outline and cut away the excess.
Add a face and position and sew the sun onto the sail and I’m on to the actual construction.
As for actual kite flying, I have a couple of places in mind to try to put a kite or two up. While the “powers that be” say you should only be out for essential trips, kite flying is essential to my mental health. I find it soothing to watch my creations floating in the sky. So when I give it a try, let’s hope I don’t get arrested for trespassing.
Well, the virus has caught up with us. The beaches have been shut down. The State Park is closed. There isn’t another good place to fly here. All of the school play fields and the soccer fields are surrounded by buildings and trees. Until I can find another suitable place, I must find an alternative. And that alternative is kite building.
So I have two projects on the table. Although I really don’t need more projects as there are a couple of unfinished projects and about half a dozen repairs already on the table. I guess I just enjoy appliqué over repair and frame construction.
So I’ve got to get the new patterns on paper in the actual size I need. That, in itself, was a project. First I had to get the designs off my computer and onto an SD card. That was easy. Next I had to get them traced onto large sheets of paper. Well, I don’t have paper large enough so I had to piece segments of paper together. After taking a picture down, I taped the paper to the now blank wall.
Then I set up my LED projector, plug in the data card containing the image files, and display them onto the paper. This takes up some time as I’m moving the projector back and forth until the image is displayed the required size. It was quite the balancing act.
Finally I could trace the designs onto the paper. Now I’m ready to cut fabric and plan out the appliqué sequences. Looks like I’ll be on my knees as the plans are bigger than my table. Thank goodness the living room has carpeting and I have a couple large cutting mats.
The other is a older kite style that I found in an old kite book, Kite Flight by Jack Botermans and Alice Weve. It’s called the Russian Giant. This book was published in 1986 and the framing instructions call for dowels. I’m going to try and adapt it to either carbon or fiberglass rods. We’ll see how that goes.
March 15 was the last day that we could drive on the beach. So we made a point of going and flying a kite or two a couple of times during the before the end. The winds had changed and come from the north. Which meant they passed over and between the houses before getting to the beach. Not the best wind for kite flying. There was a weather front moving through too so it was partly cloudy to cloudy. Not very pretty but still beach days.
Only flew a couple of kites, the Illustion Delta by Skydog and the Prism Flip kite.
Also flew a small, very old rokkaku that I received as a bag raffle item. I was really surprised it flew at all. The sail is printed on heavy ripstop-like material. After flying it that one afternoon, I see some modifications that can be made so it will fly better and more stable. I am adding it to my “to do” list. Though at a low priority.
Hate to admit but I forgot to put my camera in the truck and had to take photos with my phone. I really dislike using my phone for photos and, as you can see, if the kite is moving around high in the sky the quality goes down. Sorry.
The following day was sunny though the winds were no better. I did get the Illustion delta kite up for a while. And got a better photo of it.
Because driving on the beach is no longer permitted, our flying location for the community kite fly will change next week. It’s back to carrying our kite bags from the parking lot to the point at Fort Macon State Park. Believe me, the number of kites I take along will be reduced and more selective.
So we’ve had two days in a row of kite flying. Can you believe it? One was the community kite fly day and the other was a day too beautiful to stay home.
The weekly community fly started out chilly. It never really warmed up much but was rather pleasant since the wind was low. No wind chill. Yes, the wind was low so it somewhat restricted what kites I flew. I pulled out two of my go-to light wind kites bag. The Skate by Into The Wind and the Dunton-Taylor Box. Both jumped around in the sky as the wind was coming out of the north and having to pass over and between the beach houses. tried to fly my Emong, a glider kite by Flying Wings, but it preferred to glide back down rather than catch the wind and climb.
It just felt so good to be back on the beach with kites in the air. A sure sign spring will arrive soon and we will be flying more often. And, believe it or not, the following day was even better.
The temperature jumped up at least ten degrees and the wind picked up and came off the ocean. The best kind of kite flying wind. We put off a few of the household chores and headed back to the beach. This time with the intention of flying some new acquisitions.
This was to be the inaugural flight of the cellular kite I built at the Maryland Kite Society Workshop. I named it Sunshine (for obvious reasons). And I wanted to fly the mermaid kite I made at the Keystone Kiter’s Workshop last year, the Tametomo. She hadn’t seen much air time.
During the Maryland workshop, we picked up some kites to add to our collection. And, of course, we had to put them up as soon as we possibly could. John got a square-headed Skydog dragon kite. It has the Skydog logo on it and matches his Skydog rokkaku kite. I got a Joel Schulz parrot kite by Go Fly A Kite. Both are in perfect condition. And both loved the wind and looked great.
Here’s hoping for more perfect flying days to come.