What You Do When You Can’t Fly

The community fly day came with a clear blue sky, a bright sun and an empty beach.  However, it also had a cold temperature and no wind.  Probably would have flown despite the cold if there would have been some wind.  Instead the day was spent in front of the sewing machine.

img_0228

Six panels needed to be appliquéd before leaving for the Maryland Kite Society’s Kitebuilders Retreat.  So the afternoon was spent pushing material through the sewing machine and praying that I wouldn’t make any serious mistakes or the machine wouldn’t jam up on me.  Last year, the worse happened and my machine ended up in the repair shop mere four days before leaving for the workshop.  This year, happily, everything ran smoothly.

All six panels were sewn and the excess material was cut away on three of them.  Things were gong so smoothly,  I kept looking over my shoulder waiting for something to happen.  It was just going too good.  The last of the panels were cut away the next day.  And, amazingly, after having a late start, I was finished early.

So now I just have to get all of my supplies, tools and miscellaneous together and ready to put on the truck.  And take a last look at the weather to figure out what clothes to pack.  It is going to be even colder.  I just hope there isn’t going to be a snowstorm while we’re there.  It’s been a while since I’ve driven in snow and I know I’m out of practice.

img_0235

Fair Winds All

 

 

 

A Time Of Quiet Desperation

The weather has truly been against us as far as the community kite fly.  And this day was no exception.  Early morning rain, cloudy skies and high winds made it dark and gloomy and questionable for flying.  However, there were a couple of desperate people who were willing to take a chance and put a kite in the air.  I got some heavier line and flew my Illusion delta with its tube tails.  It handled the winds very well.  My flying buddy put up the little Spinner kite.  It just hung in the gusty winds and spun itself into a blur.  The line vibrated in a shallow repeating shallow sine curve.  It really is a fun little kite.  Because the temperature was mild, people were out walking the park.  And that little kite drew a lot of attention.

The kite build I began in the last post has been put on hold.  Instead, I am going to the Maryland Kite Society’s Kitemakers Retreat in Ellicott City, MD next month.  I’ve never been to this four-day kite building marathon and am nervously looking forward to it.  Several of my kite builder friends have been encouraging me to go, so this year instead of going to Kitemania in Florida, we’re going north.  The featured presenter is Ron Gibian and I will be making a kite of his design.  This is the 40th retreat so there are going to be some special activities.  The gem for a 40th anniversary is the ruby.  So one of the events is to build something with the anniversary/ruby theme.  So I am starting a banner with ruby gems on it.

This banner was meant to be, as a friend of mine was clearing out her stash of fabric and gave me some large pieces of nylon banner material.  And, by coincidence, they were red and black.  I’m hoping this turns out well as I’ve never made a banner before.  So I’ve checked out some banner patterns and instructions and examined some commercial banners to see how they’re made.  I think my idea will work.  Keep your fingers crossed.

The Beanie Babies as weights idea was stolen from another kite builder friend.  My bean bag weights were packed away and I have two drawers full of these little creatures courtesy of my grown daughter.  Like most children, they leave half of their “stuff” behind when they move out to live their own lives.  I hung on to these and will have them for the grandchildren when they come to visit.  Maybe I can send them home a couple at a time until the drawers are empty.  Or at least reduced down to only the ones I’m using as weights.  What do you think?

Fair Winds All

 

 

 

 

 

After The Storm

It’s been a week since hurricane Florence blew through our area.  The devastation is horrible.  So many people have lost everything they own.  So many people have no home to come back to after evacuating.  We stayed through it all and are very glad we did.  It minimized our damage to just a couple of ceilings and shingles lost.  After spending the week cleaning and removing debris, I was looking forward to a community kite fly as a means to get away from it all.  Unfortunately, Fort Macon State Park is closed.  For how long, we have no idea.  They are doing damage assessment and repair and have to see how much beach remains after the storm.

Being on the “right” side of the a very slow-moving storm results in a lot of beach erosion.  Some areas now have a four-foot drop to get to the beach.  Some have lost the beach and the first row of dunes.  And, oddly enough, some areas show no erosion at all.  The quirks of a hurricane.  So it may be a while until there will be another community kite fly.  We hope not.

So I’ll take us back to a more pleasant time.  To a kite building workshop which was held this past July.  A couple of NC kitebuilders decided at the beginning of the year that it would be nice to have Robert Brasington hold a kite building workshop in NC.  One was held four years ago in Raleigh, NC and it was about time for a return visit.  A number of builders from NC, SC and VA were definitely interested so the planning began.  The location this time was Morehead City, NC by popular demand.  Conveniently located so the builders and spouses and families (should they decide to tag along) could spend some time at the beach.

 

Thirteen builders converged, ranging in experience from complete novices to master builders.  The majority chose to build the 3/4 stealth delta kite in varying colors.  The delta was my choice as I had never made a delta before and I truly admired the Brasington deltas.  His technique of using adhesive and multiple templates is very different from what I normally do so this workshop was a learning experience.  But that is why I like to attend workshops.  I’m always open to new ways and, sometimes, easier ways to build a kite.

The camaraderie during the weekend was grand.  Taking breaks from sewing to visit with people I only see once or twice a year was one of the best parts.  Having to hem three incredibly long tails for the delta was the worst.  Unfortunately, some people had to leave early on Sunday and others were in a rush to go to the beach and fly their new creations.  So we missed getting a group photo.  All in all, it was a great weekend and one which many of us are looking forward to doing again.

Fair Winds All.

All I Wanted To Do Was Fly

The community kite fly day has come and gone.  An unwanted guest showed up and caused a cancellation.  The guest’s name — FLORENCE.  Hurricane Florence brought two days  of high winds and three days of rain.  And evacuations and curfews which kept us from the beach.  Even though I had thoughts of taking my Flexifoil out and flying in the higher winds.  Of course, no one would go with me.  And I had no re-entry pass to get over the bridge to the beach after Florence passed.

So let’s go back to a better time when we got together with a group of kite builders for a weekend of building.  The Keystone Kiters  Club of Pennsylvania sponsored a kite building workshop in the month of August.  The workshop is a major trip from North Carolina for a weekend but it is also a time of sharing and learning.  It can get intense.

This year we built a modified edo designed by Mike Mosman, an American Kitefliers Association Grand Champion Kite Builder.  The sail designs were completed at home so the weekend would be preparing and framing the kite.  I had a vision of what I wanted this kite to look like.  And I tried a different technique of appliqué.  After several evenings of sewing the sail was complete.  At the workshop, it took both days to hem, attach the cross-spars and vertical spars and bridle the kite.  The bungee cord arrangement for the vertical spars and the cascading bridle were new constructions for me.  That’s one of the reasons to travel to these workshops – to learn new construction techniques.  Especially those that you would never think of or figure out on your own.

The end result is a kite that flies beautifully, looks the way I had imagined it would and has stitching I’m proud of.  The kite is named “The Koi Pond”.

Fair Winds All