Lack of Motivation

We are complying with the Stay-at-home order and limiting our trips out of the house to the grocery store and the pharmacy.  There is still quite a bit of traffic locally and there are still people who are gathering on the beaches.  My kite flying has been very limited.  I tried to fly in the backyard and had moderate success with the light wind glider kite, the Emong by Flying Wings Kites.

I’m sure the neighbors found it amusing watching me stumble around the backyard with a kite string in one hand and a cell phone in the other.  At one point the wind appeared to be picking up and I tried another kite I happened to have handy, the Joel Scholz Parrot by Premier Kites.  While it did go up for a while, it was never very high and needed constant supervision.

img_4743

As for my kite building, I have been suffering from a serious lack of motivation.  Part of which was due to the fact I was going to have to crawl on the floor in order to get the whole appliqué piece properly situated on the main sail.  One of the drawbacks of not having a large table to work on.  I finally convinced myself to just get down and get it done.  With absolutely no help from my able assistant.

img_0308

And so, life goes on.  Stay safe everyone.

Fair Winds All

 

 

Stay At Home

The Stay-At-Home order came down.  Except for essential errands, we are to stay home and away from other places and other people to help stop the spread of the virus.  While you would think this would give me lots of time to get things done around the house and yard and work on my kite projects.  Instead, the lack of any type of deadline only increases my tendency to put things off.  And so, this weeks post is late.  Sorry.

I have started the Giant Hata kite.  The main sail is black and is 60″ by 60″.  That was a challenge on my narrow table.  It was only made harder because my supposedly 60″ roll of fabric was really 61.5″. So instead of making just one long cut, I had to trim one side as well.

img_0291

The  pattern for this kite is a variation of the sun theme I used on my Maryland Kite Society build.  Only this is going to be a sun/moon.  The pattern was traced onto the yellow fabric and the white moon fabric laid over it.  Then it was sew the outline and cut away the excess.

Add a face and position and sew the sun onto the sail and I’m on to the actual construction.

As for actual kite flying, I have a couple of places in mind to try to put a kite or two up.  While the “powers that be” say you should only be out for essential trips, kite flying is essential to my mental health.  I find it soothing to watch my creations floating in the sky.  So when I give it a try, let’s hope I don’t get arrested for trespassing.

Stay safe, stay healthy.

Fair Winds All

 

No Kite Flying For A While

Well, the virus has caught up with us.  The beaches have been shut down.  The State Park is closed.  There isn’t another good place to fly here.  All of the school play fields and the soccer fields are surrounded by buildings and trees.  Until I can find another suitable place, I must find an alternative.  And that alternative is kite building.

So I have two projects on the table.  Although I really don’t need more projects as there are a couple of unfinished projects and about half a dozen repairs already on the table.    I guess I just enjoy appliqué over repair and frame construction.

So I’ve got to get the new patterns on paper in the actual size I need.  That, in itself, was a project.  First I had to get the designs off my computer and onto an SD card.  That was easy.  Next I had to get them traced onto large sheets of paper.  Well, I don’t have paper large enough so I had to piece segments of paper together.  After taking a picture down, I taped the paper to the now blank wall.

img_0278

 

Then I set up my LED projector, plug in the data card containing the image files, and display them onto the paper.  This takes up some time as I’m moving the projector back and forth until the image is displayed the required size.  It was quite the balancing act.

img_0277

 

Finally I could trace the designs onto the paper.  Now I’m ready to cut fabric and plan out the appliqué sequences.  Looks like I’ll be on my knees as the plans are bigger than my table.  Thank goodness the living room has carpeting and I have a couple large cutting mats.

img_0279

One of the two projects is an online workshop at the Kitebuilders Forum, http://www.kitebuilder.com/forums/viewforum.php?f=42.  It is Project 10.0 – Jumbo Hata.

The other is a older kite style that I found in an old kite book, Kite Flight by Jack Botermans and Alice Weve.  It’s called the Russian Giant.  This book was published in 1986 and the framing instructions call for dowels.  I’m going to try and adapt it to either carbon or fiberglass rods.  We’ll see how that goes.

Wish me luck.

Fair Winds All

 

Flying Days

So we’ve had two days in a row of kite flying. Can you believe it? One was the community kite fly day and the other was a day too beautiful to stay home.

The weekly community fly started out chilly. It never really warmed up much but was rather pleasant since the wind was low. No wind chill. Yes, the wind was low so it somewhat restricted what kites I flew. I pulled out two of my go-to light wind kites bag. The Skate by Into The Wind and the Dunton-Taylor Box. Both jumped around in the sky as the wind was coming out of the north and having to pass over and between the beach houses.   tried to fly my Emong, a glider kite by Flying Wings, but it preferred to glide back down rather than catch the wind and climb. 

It just felt so good to be back on the beach with kites in the air. A sure sign spring will arrive soon and we will be flying more often. And, believe it or not, the following day was even better.

The temperature jumped up at least ten degrees and the wind picked up and came off the ocean. The best kind of kite flying wind. We put off a few of the household chores and headed back to the beach. This time with the intention of flying some new acquisitions.

This was to be the inaugural flight of the cellular kite I built at the Maryland Kite Society Workshop. I named it Sunshine (for obvious reasons). And I wanted to fly the mermaid kite I made at the Keystone Kiter’s Workshop last year, the Tametomo. She hadn’t seen much air time.

During the Maryland workshop, we picked up some kites to add to our collection. And, of course, we had to put them up as soon as we possibly could. John got a square-headed Skydog dragon kite. It has the Skydog logo on it and matches his Skydog rokkaku kite. I got a Joel Schulz parrot kite by Go Fly A Kite. Both are in perfect condition. And both loved the wind and looked great.

img_1183

img_1173

Here’s hoping for more perfect flying days to come.

Fair Winds All.